You will need to drill a 3/4″ hole to accommodate the connectors on the cable. The connectors are the same on both ends, so it doesn’t matter which way you run the cable. You will just need to make sure you have enough to stretch between the dish location and the router location.
Luckily, I found the Starlink router’s Wi-Fi to be pretty strong. The signal came in perfectly through multiple walls and floors. Through testing, we’ve found it’s good enough to accommodate most small- to medium-sized homes no matter where you place them. Someone opening their Starlink kit for the first time may expect it to come with a detailed instruction booklet like most complicated tech hardware. However, I was surprised that the only instructions that came in the box were a simple diagram on poster board that didn’t even have words.
The first step in setting up and installing Starlink is downloading the Starlink mobile app. The application is readily available for Android as well as iOS Devices. So, let’s dive into our Starlink setup and install guide without taking any more time.
Pick a location for the router and power supply
The dish will be angled slightly northward if you are located in the northern hemisphere. According to the app, your connection speed will decrease if there are any barriers in the way. If you want Starlink to work properly, you’ll need to find a mounting spot where there won’t be any interference.
Step 3: Unpack Starlink Kit
Also, consider factors like proximity to a power outlet and the desired Wi-Fi coverage area. This is the final step of this Starlink setup and install guide. You have to install the Starlink app on your Android or iPhone.
Finding a Spot for the Router
- The kit includes everything you need, like the drill bit, grommets, and sealant.
- A view of the sky of at least 100 degrees is required for the Starlink dish.
- It’s also great for seasonal use and traveling since you can easily pack up the dish and equipment.
However, you can still reach them officially and get your problem solved. Launch the Starlink app or log into their website and scroll to the support page. You may now launch your Starlink app and log in using your credentials to manage your WiFi. The round dish has a 50 ft detached cable with a straight connector on one side and an elbow connector on the other.
- Now that you have unboxed everything, it’s time to survey and find a suitable place to install your dish.
- If you want this installation to be permanent, you will need to drill holes to route the cable from the outside of your home to the inside.
- Therefore, each speed test result depends on your internet plan, weather, congestion, and distance from the router, among other factors.
- This update took me 10 minutes, but times can vary depending on your connection strength.
- Also, note that some mounting surfaces may require specialized mounting hardware, which you must purchase separately.
Step 6: Connect to Starlink
The Starlink app is your number one tool for managing your Starlink and network from now on. Read our Starlink app guide for more on configuring your internet settings and viewing performance and data usage statistics. It’s also the fastest way to submit support tickets if your Starlink isn’t performing well.
If your Starlink subscription is inactive, you’ll still be able to access Starlink.com and use the app to reactivate and manage your plan. I wrote a full tutorial on How to Activate Starlink Service Without Internet. Like with mounting the dish, Starlink offers accessories to help. I chose to purchase the cable routing kit from Starlink to make running the cable simple. The kit includes everything you need, like the drill bit, grommets, and sealant. I highly recommend picking up the cable routing kit, it makes this step so easy.
Here’s How I Set Up Starlink In My Tesla
Since trees and hills surround my cabin, I needed to try multiple spots before getting an optimal signal with fewer obstructions. However, even if the app advised that interruptions were possible, I found my signal good enough and didn’t notice significant slowdowns. The 75-foot cable that has the elbow end will be router inside your house and connect to the bottom of your router. Alternatively, you can find free tools or apps online to check your Starlink speed. However, the speed may not be consistent since it depends on many factors.
Log in
If you have got your Starlink, you have already done 50% of the setup. Because the waiting period is so tough and a lot of people lose hope, it is very intimidating. However, believe us the process is quite easy and you won’t break a sweat unless climbing the roof is a difficult task for you. In this Starlink setup and install guide, we will discuss everything you need to know in order to get your Starlink ready and working. Ensure you have all the necessary tools, accessories, and suitable mounting hardware before installing. In case of any problem, you can contact customer support for help.
How To Set Up Starlink Mesh
Hopefully, you’ve already found such a spot by using the obstruction scanner that I went over in the previous section. I chose to install my Starlink at the peak of my roof, directly on the fascia board. The higher the dish, the less chance trees will obstruct its field of view. In the U.S., Starlink routers perform hundreds of thousands of speed test measurements and hundreds of billions of latency measurements every day. In the US, fewer than one percent of measurements exceed 55 ms, significantly better than even some terrestrial operators. For permanent setups you’ll want to run the Starlink cable through an exterior wall, and then route it as best you can to the Wifi router.
Luckily, the app makes it easy and shows you how to turn it using a compass interface. Next is finding a good spot for the Starlink router and power supply. Like any Wi-Fi router, the ideal place is in the most central location of your home. Once I routed the cable through my wall, I was able to hook everything up at the router. The Starlink cable from the dish plugs into the left port on the back of the router. The barrel connector from the power supply plugs into the port on the right.